ABB ACS880-07C-0084A-7+P974 ACS880 ABB Drive

ABB Drive

ACS880-07C

ACS880-07C-0084A-7+P974

ACS880

ABB standard drives are simple to buy, install, configure and use, saving considerable time. They are widely available through ABB channel partners, hence the use of the term standard. The drives have common user and process interfaces with fieldbuses, common software tools for sizing, commissioning, maintenance and common spare parts.

Biz bilen habarlaşyň

Your email address will not be published. Required fields are marked with *

beýany

ABB ACS880-07C-0084A-7+P974 ACS880 ABB Drive

Description
Occupying the critical gap between modest 55 kW and heavier 90 kW loads, the ACS880-07C-0084A-7+P974 delivers 75 kW from 84 A at 690 V within the same slender R6 footprint. The unit’s hallmark is its “silent run” profile—only 79 dB(A) at one metre—achieved by a slow-speed, large-diameter fan coupled with aerofoil blades normally found in HVAC chillers. Despite its quiet demeanour, the P974 brain inside executes torque-vector calculations every 62.5 µs, providing rock-solid speed holding for winding applications or precise tension control. A built-in EMC filter meets C3 limits without external chokes, while an optional sine-wave filter eliminates bearing currents in older 690 V motors. Front-access power terminals and a swing-out control plate give technicians full reach without removing the door, slashing mean time to repair.

Features
• 75 kW / 84 A continuous, 110 % overload for 60 s; sensorless vector accuracy ± 0.5 % speed, ± 2 % torque.
• R6 frame, 1 750 m³/h airflow, tool-less fan cassette replacement in < 5 min.
• P974 adaptive programming allows ladder-style logic without external PLC; 2 kB non-volatile user memory.
• Brake chopper 75 kW peak, resistor SAFURBDF500 5.4 Ω 90 s duty cycle.
• Safe torque-off, safe stop 1 and safe brake control certified to IEC 61800-5-2.
• Removable HMI with back-lit OLED display readable in direct sunlight.
• Conformal-coated boards, chemical-resistant polyester front film—ideal for fertilizer plants.

Applications
In large sawmills, the 0084A-7+P974 drives 75 kW planer feed rolls, automatically adjusting speed when timber density changes, improving yield and surface finish. Dairy processors use it on high-pressure CIP pumps, running at reduced speed between cleaning cycles to save energy while maintaining line pressure. Bulk-handling conveyors at grain terminals rely on its safe brake control to stop 200 m belts loaded with wheat, preventing rollback and spillage.

ABB ACS880-07C-0084A-7+P974 ACS880 ABB Drive

ACS880 Drive:

ACS880-07C-0105A-3+P974

ACS880-07C-0145A-3+P974

ACS880-07C-0169A-3+P974

ACS880-07C-0206A-3+P974

ACS880-07C-0246A-3+P974

ACS880-07C-0293A-3+P974

ACS880-07C-0363A-3+P974

ACS880-07C-0430A-3+P974

ACS880-07C-0505A-3+P974

ACS880-07C-0585A-3+P974

ACS880-07C-0650A-3+P974

ACS880-07C-0725A-3+P974

ACS880-07C-0820A-3+P974

ACS880-07C-0880A-3+P974

ACS880-07C-0061A-7+P974

ACS880-07C-0084A-7+P974

ACS880-07C-0098A-7+P974

ACS880-07C-0119A-7+P974

ACS880-07C-0142A-7+P974

ACS880-07C-0174A-7+P974

ACS880-07C-0210A-7+P974

ACS880-07C-0271A-7+P974

ACS880-07C-0330A-7+P974

ACS880-07C-0370A-7+P974

ACS880-07C-0430A-7+P974

ACS880-07C-0470A-7+P974

ACS880-07C-0522A-7+P974

ACS880-07C-0590A-7+P974

ACS880-07C-0650A-7+P974

ACS880-07C-0721A-7+P974

ACS880-07C-0105A-3+P974

ACS880-07C-0145A-3+P974

ACS880-07C-0169A-3+P974

ACS880-07C-0206A-3+P974

ACS880-07C-0246A-3+P974

ACS880-07C-0293A-3+P974

ACS880-07C-0363A-3+P974

ACS880-07C-0430A-3+P974

ACS880-07C-0505A-3+P974

ACS880-07C-0585A-3+P974

ACS880-07C-0650A-3+P974

ACS880-07C-0725A-3+P974

ACS880-07C-0820A-3+P974

ACS880-07C-0880A-3+P974

ACS880-07C-0061A-7+P974

ACS880-07C-0084A-7+P974

ACS880-07C-0098A-7+P974

ACS880-07C-0119A-7+P974

ACS880-07C-0142A-7+P974

ACS880-07C-0174A-7+P974

ACS880-07C-0210A-7+P974

ACS880-07C-0271A-7+P974

ACS880-07C-0330A-7+P974

ACS880-07C-0370A-7+P974

ACS880-07C-0430A-7+P974

ACS880-07C-0470A-7+P974

ACS880-07C-0522A-7+P974

ACS880-07C-0590A-7+P974

ACS880-07C-0650A-7+P974

ACS880-07C-0721A-7+P974

Näme üçin bizi saýlaň:

1. Iň az bahadan talaplaryňyza görä ajaýyp material alyp bilersiňiz.

2. Şeýle hem, Reworks, FOB, CFR, CIF we gapydan gapylara eltiş bahalaryny hödürleýäris. Shük daşamak üçin gaty tygşytly iş etmegi maslahat berýäris.

3. Biziň berýän materiallarymyz, çig mal synag şahadatnamasyndan iň soňky ölçeg beýanyna çenli doly barlanýar. (Hasabatlar talap boýunça görkeziler)

4. 24 sagadyň dowamynda jogap bermegi kepillendirýäris (köplenç şol bir sagatda)

5. Önümçilik wagtyny azaltmak bilen aksiýa alternatiwalaryny, degirmen önümlerini alyp bilersiňiz.

6. Müşderilerimize doly wepaly. Optionshli wariantlary gözden geçireniňizden soň talaplaryňyza laýyk gelmeýän bolsa, gowy müşderi gatnaşyklaryny döredjek ýalan wadalar berip sizi ýalňyşmarys.

Ondan soň näme bolýar?

1. E-poçta tassyklamasy

Gözlegiňizi alandygymyzy tassyklaýan e-poçta alarsyňyz.

2. Aýratyn satuw dolandyryjysy

Toparymyzdan biri, bölümleriňizi (spesifikasiýaňyzy) we ýagdaýyňyzy tassyklamak üçin habarlaşar.

3. Sitata

Aýratyn zerurlyklaryňyza laýyk gelýän giňişleýin sitata alarsyňyz.

2000+ Önümler hakykatdanam bar

100% marka täze zawod möhürlenendir - asyl

Bütin dünýäde eltip bermek - Logistik hyzmatdaşlar UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Kepillik 12 aý - partshli bölekler täze ýa-da şertli

Hiç hili kynçylyk yzyna gaýtarmak syýasaty - Müşderi goldaw topary

Töleg - PayPal, kredit / debet kartoçkasy ýa-da bank / sim geçirişi

Payment

HKXYTECH ygtyýarly paýlaýjy ýa-da bu web sahypasynda görkezilen öndürijileriň wekili däl. Marka atlary we söwda bellikleri degişli eýeleriniň eýeçiligi.

Degişli önümler

ABB Drive ACS880-01-12A6-3 ACS880

ABB standart diskleri satyn almak, gurmak, düzmek we ulanmak ýönekeý, ep-esli wagt tygşytlaýar. ABB kanal hyzmatdaşlary arkaly giňden elýeterlidir, şonuň üçin standart adalgasynyň ulanylmagy. Sürüjilerde umumy ulanyjy we meýdan awtobuslary bilen işlemek interfeýsleri, ululyk, işe girizmek, tehniki hyzmat we umumy ätiýaçlyk şaýlary üçin umumy programma gurallary bar.

ABB Drive ACS880-01-045A-3 ACS880

Abb 3ABD00035999999999999-daks880-01-01-01-01-03A3.3 ACS880-01

ABB standart sürüjileri ep-esli wagt satyn almak, gurmak, sazlamak we ulanmak, düzmek, düzmek we ulanmak. AGB kanallarynda giňden elýeterlidir, şonuň üçin standart möhleti ulanýar. Draýwerleriň "MeýterBageS" -ly umumy ulanyjy, işe girizmek, hyzmat etmek, hyzmat etmek, hyzmat etmek, tehniki hyzmat we umumy ätiýaçlyk şraglary üçin umumy programma üpjünçiligi enjamlary üçin umumy programma üpjünçiligi programmalary bar.

Abb 3ABD000359595958-D ACS880-01-01-01-01.3 ACs880-01