GMI D2011M Intrinsically Safe Analog-Multiplexer DIN-Rail Model Intrinsically Safe Multiplexer System

GMI
D2011M
Interface Multiplexer Systems
Fast Delivery
GMI D2011M Intrinsically Safe Analog-Multiplexer DIN-Rail Model Intrinsically Safe Multiplexer System
Na kontaktoni

Your email address will not be published. Required fields are marked with *

përshkrim

DESCRIPTION

D2000M series Intrinsically Safe Multiplexing System consists of one to four Analog-Temperature Multiplexer units model D2010M, up to twelve Expander units model D2011M, or up to four Digital Multiplexer units model D2030M, mounted in Hazardous Area/Hazardous Locations Zone 1-2, Gas Group IIC-IIB-IIA T4 or Class I, Division 1-2, Group A, B, C, D T4 and connected via a single/redundant 2 wires data communication/supply line to a Modbus Gateway unit model D2050M, mounted in Safe Area/Non Hazardous Locations and connected to a PLC, DCS or PC. Multiplexer Expander D2011M units can be installed in the field, close to input sensors, for data acquisition of signal from Hazardous Area/Hazardous Locations Zone 0-1-2 or Class I, Class II, Class III, Division 1-2. The units are primarily intended for Hazardous Area/Hazardous Locations acquisition of low level signals from mV, thermocouples, thermoresistances or mA (via external shunt device like D1090Q four channel shunt resistor) sources. D2011M scans all channels using state of the art solid state isolated relays, and stores all data in the D2010M memory buffer connected to it, where they can be rapidly accessed by the Modbus Gateway D2050M unit. Each D2011M unit accepts directly up to 16 input channels. An integrating type, high rejection, high accuracy (18 bits) A/D converter installed on D2010M unit that control up to three Expander D2011M, provides accurate and stable measurements. All parameters are software configurable by serial commands via D2050M Gateway unit and stored in the D2010M unit connected to the Expander.


FEATURES

Intrinsically Safe for installation in Zone 1, 2 Gas Group IIC, IIB, IIA T4 or Class I, Division 1, 2 Groups A, B, C, D, Temperature Code T4 and Class I, Zone 1, 2 Groups IIC, IIB, IIA, Temperature Code T4 Hazardous Area/Hazardous Location.

Universal inputs (mV, TC, RTD) from Zone 0, 1, 2 or Class I, II, III, Division 1, 2, Groups A, B, C, D, E, F, G, and Class I, Zone 0, 1, 2 Groups IIC, IIB, IIA Hazardous Location.

Isolation of 200 V input to input (mV or TC), 60 V input to input (RTD) and 500 V input to ground, allows grounded sensors.

EMC Compatibility to EN61000-6-2, EN61000-6-4.

High reliability, SMD components.

High density, 16 channels per unit.

1 terminal block per input, no external terminal block required.


CHANNELS

16


RELATED MODELS

D2010M

D2011M

D2030M

D2050M

D2052M

D2053M



Pse na zgjodhet ne:

1. Ju mund të merrni materialin e përsosur sipas kërkesës tuaj me çmimin më të vogël të mundshëm.

2. Ne gjithashtu ofrojmë Reworks, FOB, CFR, CIF dhe çmimet e dërgesës derë më derë. Ne ju sugjerojmë të bëni një marrëveshje për transport e cila do të jetë mjaft ekonomike.

3. Materialet që ne ofrojmë janë plotësisht të verifikueshme, që nga certifikata e testit të lëndës së parë deri në deklaratën përfundimtare të dimensioneve. (Raportet do të shfaqen sipas kërkesës)

4. Ne garantojmë të japim një përgjigje brenda 24 orëve (zakonisht në të njëjtën orë)

5. Mund të merrni alternativa stoku, dërgesa mulliri me minimizimin e kohës së prodhimit.

6. Ne jemi plotësisht të përkushtuar ndaj klientëve tanë. Nëse nuk do të jetë e mundur të plotësohen kërkesat tuaja pas shqyrtimit të të gjitha opsioneve, ne nuk do t'ju mashtrojmë duke bërë premtime të rreme që do të krijojnë marrëdhënie të mira me klientët.


Çfarë ndodh më pas?

1. Konfirmimi me email

Do të merrni një email që konfirmon se ne kemi marrë kërkesën tuaj.

2. Menaxher Ekskluziv i Shitjeve

Një nga ekipi ynë do të kontaktojë për të konfirmuar specifikimin dhe gjendjen e pjesës tuaj.

3. Citimi juaj

Ju do të merrni një kuotë gjithëpërfshirëse të përshtatur për nevojat tuaja specifike.


Mbi 2000 produkte me të vërtetë të disponueshme

Fabrika 100% e re e mbyllur - origjinale

Transporti në mbarë botën - Partnerët logjistik UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Garancia 12 Muaj - Të gjitha pjesët të reja ose të rinovuara

Politika e kthimit pa probleme - Ekipi i përkushtuar i mbështetjes së klientit

Pagesa - PayPal, kartë krediti/debiti ose transfertë bankare/teli

Payment


HKXYTECH nuk është një shpërndarës ose përfaqësues i autorizuar i prodhuesve të paraqitur në këtë faqe interneti. Emrat e markave dhe markat tregtare të paraqitura janë pronë e pronarëve të tyre përkatës.

Produkte të lidhura
GMI 5700 SIL3 HART Mux Modem for Termination Board HART Modem Interface Multiplexer Systems
GMI 5700 SIL3 HART Mux Modem for Termination Board HART Modem Interface Multiplexer Systems
GMI 5700 SIL3 HART Mux Modem for Termination Board HART Modem Interface Multiplexer Systems
GMI 5700-110 SIL3 HART Mux Modem for Termination Board HART Modem Interface Multiplexer Systems
GMI 5700-110 SIL3 HART Mux Modem for Termination Board HART Modem Interface Multiplexer Systems
GMI 5700-110 SIL3 HART Mux Modem for Termination Board HART Modem Interface Multiplexer Systems
GMI D2010M Intrinsically Safe Analog-Temperature Multiplexer Intrinsically Safe Multiplexer System
GMI D2010M Intrinsically Safe Analog-Temperature Multiplexer Intrinsically Safe Multiplexer System
GMI D2010M Intrinsically Safe Analog-Temperature Multiplexer Intrinsically Safe Multiplexer System
GMI D2030M Intrinsically Safe Digital Multiplexer DIN-Rail Model Intrinsically Safe Multiplexer System
GMI D2030M Intrinsically Safe Digital Multiplexer DIN-Rail Model Intrinsically Safe Multiplexer System
GMI D2030M Intrinsically Safe Digital Multiplexer DIN-Rail Model Intrinsically Safe Multiplexer System

Kërkim produkti