Pepperl+Fuchs KFA5-DU-Ex1.D Switch Amplifiers Isolated Barriers

Pepperl+Fuchs KFA5-DU-Ex1.D Switch Amplifiers Isolated Barriers

Description

The KFA5-DU-Ex1.D is a highly reliable 1-channel isolated barrier designed for intrinsic safety applications in industrial environments. It enables the secure transfer of digital signals from NAMUR sensors or mechanical contacts in hazardous areas to safe areas. This model is powered by a 115 V AC supply and is equipped with form A normally open relay contacts for the safe area load. The device is constructed with a polycarbonate housing, ensuring durability and resistance to environmental stresses. Its protection degree of IP20 makes it suitable for indoor use in controlled environments. The KFA5-DU-Ex1.D is designed to be mounted on a 35 mm DIN rail, adhering to EN 60715 standards, which simplifies installation and integration into existing infrastructure.

Features

The KFA5-DU-Ex1.D features a removable terminal block with an integrated self-opening device, simplifying installation and wiring processes. The device operates within a temperature range of -20°C to 60°C, making it suitable for diverse environmental conditions. With a rated voltage of 103.5 to 126 V AC and a power consumption of ≤ 1.3 W, the KFA5-DU-Ex1.D ensures energy efficiency without compromising performance. Its compact design allows for efficient use of space, making it an ideal solution for applications where panel space is limited. The device also supports line fault detection, which can be enabled or disabled via switch S3, enhancing operational safety and reliability. Additionally, it includes a unique collective error messaging feature when used with the Power Rail system, providing immediate notification of errors and enhancing system reliability. The switching point of the device is designed to operate within a range of 1.2 to 2.1 mA, with a switching hysteresis of approximately 0.2 mA, ensuring precise and reliable signal transmission. The device also supports a pulse/pause ratio of ≥ 20 ms/≥ 20 ms, making it suitable for applications requiring precise timing and control.

Function

The primary function of the KFA5-DU-Ex1.D is to transfer digital signals from hazardous areas to safe areas while maintaining galvanic isolation between the two. This ensures that any noise, potential differences, or transients from the hazardous area do not affect the safe area control circuits. The device uses a zener barrier in combination with a galvanic isolation network to limit the energy transmitted to the field, thereby ensuring intrinsic safety. In the event of a fault in the field circuit, the relays revert to their de-energized state, and the LEDs on the device indicate the fault according to NAMUR NE44 standards. This feature ensures quick identification and resolution of issues, minimizing downtime. The KFA5-DU-Ex1.D is certified for use in hazardous locations, adhering to international safety standards and protocols, making it suitable for applications in oil and gas refineries, chemical plants, and other hazardous environments where safety and reliability are paramount.

KCD2-SR-Ex1.LB

KFD2-SR2-Ex1.W

KFA5-SR2-Ex1.W

KFA6-SR2-Ex1.W

KFD2-SR2-Ex1.W.LB

KFA5-SR2-Ex1.W.LB

KFA6-SR2-Ex1.W.LB

KCD2-SR-Ex2

KFD2-SR2-Ex2.W

KFA5-SR2-Ex2.W

KFA6-SR2-Ex2.W

KFA5-SR2-Ex2.W.IR

KFA6-SR2-Ex2.W.IR

KFD2-SR2-Ex2.2S

KFD2-SRA-Ex4

KFD2-SR-Ex1.4S.LK

KFD2-ST2-Ex1.LB

KFD2-ST2-Ex2

KFD2-SOT2-Ex1.LB

KFD2-SOT2-Ex1.LB.IO

KFD2-SOT2-Ex1.N

KFD2-SOT2-Ex2

KFA5-SOT2-Ex2

KFA6-SOT2-Ex2

KFD2-SOT2-Ex2.IO

KFD2-SH-Ex1

KFD2-SH-Ex1.T.OP

KHA6-SH-Ex1

KFD2-DU-Ex1.D

KFA5-DU-Ex1.D

KFA6-DU-Ex1.D

Zakaj izbrati nas:

1. Po najnižji možni ceni lahko dobite popoln material glede na vaše zahteve.

2. Ponujamo tudi cene za predelavo, FOB, CFR, CIF in dostavo od vrat do vrat. Predlagamo vam, da sklenete dogovor o pošiljanju, ki bo precej ekonomičen.

3. Materiali, ki jih nudimo, so popolnoma preverljivi, vse od potrdila o preskusu surovin do končne izjave o dimenzijah. (Poročila bodo prikazana na zahtevo)

4. Zagotavljamo, da bomo odgovorili v 24 urah (običajno v isti uri)

5. Dobite lahko alternativne zaloge, dobave mlinov s čim manjšim proizvodnim časom.

6. Popolnoma smo predani svojim strankam. Če po preučitvi vseh možnosti ne bo mogoče izpolniti vaših zahtev, vas ne bomo zavajali z lažnimi obljubami, kar bo ustvarilo dobre odnose s strankami.

Kaj se zgodi potem?

1. Potrditev po e-pošti

Prejeli boste e-poštno sporočilo, ki potrjuje, da smo prejeli vaše povpraševanje.

2. Ekskluzivni vodja prodaje

Eden od naše ekipe vas bo kontaktiral, da potrdi specifikacijo in stanje vaših delov.

3. Vaš citat

Prejeli boste celovito ponudbo, prilagojeno vašim specifičnim potrebam.

Resnično na voljo več kot 2000 izdelkov

100% popolnoma nov, tovarniško zaprt - original

Pošiljanje po vsem svetu – logistični partnerji UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Garancija 12 mesecev - vsi deli novi ali obnovljeni

Politika vračil brez težav – namenska ekipa za podporo strankam

Plačilo – PayPal, kreditna/debetna kartica ali bančno/bančno nakazilo

HKXYTECH ni pooblaščeni distributer ali zastopnik proizvajalcev, predstavljenih na tej spletni strani. Predstavljena imena blagovnih znamk in blagovnih znamk so last njihovih lastnikov.