GMI D1048S SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail Intrinsically Safe Isolators

DESCRIPTION

The single channel DIN-Rail Loop Powered Digital Output Isolator, D1048S, is suitable for driving solenoid valves, visual or audible alarms to alert a plant operator, or other process control devices in Hazardous Area from a driving signal in Safe Area. It can also be used as a controllable supply to power measuring or process control equipment. Its use is allowed in applications requiring up to SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. The Safety PLC or DCS driving signal powers the field device through the D1048S, which provides isolation and is capable of monitoring the conditions of the line. Short and open circuit diagnostic monitoring, dip-switch selectable and active when input power is present, provides LED indication and NC transistor output signaling. When fault is detected output is de-energized until normal condition is restored. Line short and open output circuit fault detection is also reflected on the PLC / DCS input circuit providing less than 10 mA consumption. An override input, dip-switch selectable, is provided to permit a safety system to override the control signal. When enabled, a low input voltage always de-energizes the field device regardless of the input signal. Three basic output circuits are selectable, with different safety parameters, to interface the majority of devices on the market. The selection among the three output characteristics is obtained by connecting the field device to a different terminal block.

FEATURES

SIL3/SC3

Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.

Loop powered for NE loads.

Short and open circuit line diagnostic monitoring with LED, transistor output and current level on input.

Output short circuit proof and current limited

Three port isolation, Input/Output/Fault.

EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.

In-field programmability by DIP Switch.

250 Vrms (Um) max. voltage allowed to the Instruments associated with the barrier.

CHANNELS

1

RELATED MODEL

D1046Y

D5040D

D5040S

D5048S

D5049S

D5240T

X1-IS-DO-01-S

X1-IS-DO-02-S

D1040Q

D1041Q

D1042Q

D1043Q

D1044D

D1044S

D1045Y

D1048S

D1049S

D5244D

D5244S

D1035S

Zakaj izbrati nas:

1. Po najnižji možni ceni lahko dobite popoln material glede na vaše zahteve.

2. Ponujamo tudi cene za predelavo, FOB, CFR, CIF in dostavo od vrat do vrat. Predlagamo vam, da sklenete dogovor o pošiljanju, ki bo precej ekonomičen.

3. Materiali, ki jih nudimo, so popolnoma preverljivi, vse od potrdila o preskusu surovin do končne izjave o dimenzijah. (Poročila bodo prikazana na zahtevo)

4. Zagotavljamo, da bomo odgovorili v 24 urah (običajno v isti uri)

5. Dobite lahko alternativne zaloge, dobave mlinov s čim manjšim proizvodnim časom.

6. Popolnoma smo predani svojim strankam. Če po preučitvi vseh možnosti ne bo mogoče izpolniti vaših zahtev, vas ne bomo zavajali z lažnimi obljubami, kar bo ustvarilo dobre odnose s strankami.

Kaj se zgodi potem?

1. Potrditev po e-pošti

Prejeli boste e-poštno sporočilo, ki potrjuje, da smo prejeli vaše povpraševanje.

2. Ekskluzivni vodja prodaje

Eden od naše ekipe vas bo kontaktiral, da potrdi specifikacijo in stanje vaših delov.

3. Vaš citat

Prejeli boste celovito ponudbo, prilagojeno vašim specifičnim potrebam.

Resnično na voljo več kot 2000 izdelkov

100% popolnoma nov, tovarniško zaprt - original

Pošiljanje po vsem svetu – logistični partnerji UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Garancija 12 mesecev - vsi deli novi ali obnovljeni

Politika vračil brez težav – namenska ekipa za podporo strankam

Plačilo – PayPal, kreditna/debetna kartica ali bančno/bančno nakazilo

HKXYTECH ni pooblaščeni distributer ali zastopnik proizvajalcev, predstavljenih na tej spletni strani. Predstavljena imena blagovnih znamk in blagovnih znamk so last njihovih lastnikov.