GMI 5700-110 SIL3 HART Mux Modem for Termination Board HART Modem Interface Multiplexer Systems

DESCRIPTION

The HART® Multiplexer Modem interfaces up to 256 smart devices (transmitters, I/P, proportional valves, etc…) in a HART® Network. Each device can be fully identified, configured and monitored either by a remote PC running an FDT-based software package (PACTware™, etc...) through a dedicated Device Type Manager (DTM), by HART® OPC Server, or by a specific asset management system. Up to 63 Multiplexer Modem (16128 loops) can be connected in multi-drop mode to the PC through the RS485 HART® Protocol, whose baudrate can be configured via software. The module is intended to be mounted on the following Term. Boards:

- TB(E)-D5001-HRT-003: to be used with GMI AI/AO Term. Boards;

- TB(E)-D5001-HRT-004: to be used with DIN-Rail mounted barriers/isolators or direct field connections, 4-20 mA loop signals, AI card impedance = 250 Ω;

- TB(E)-D5001-HRT-005: to be used with DIN-Rail mounted barriers/isolators or direct field connections, 1-5 V loop signals;

- TB(E)-D5001-HRT-006: to be used with DIN-Rail mounted barriers/isolators or direct field connections, 4-20 mA loop signals, AI card impedance = 100÷150 Ω;

- TB(E)-D5001-HRT-007: to be used with DIN-Rail mounted barriers/isolators or direct field connections, 4-20 mA loop signals,

AI card impedance = 0÷50 Ω.

Termination board types can be combined to manage different interfaces at the same time, provided the maximum number of channels is not exceeded.

The HART® Multiplexer Modem is SIL 3 certified as non-interfering with the signal loops.

FEATURES

SIL 3 / SC 3

Installation in Zone 2/Div. 2

Up to 256 channels (extendable to 16128 with 63 multi-drop units)

HART® RS-485 interface to access field smart devices

Three port isolation, Field Interface/Serial Interface/Supply

Simplified installation on custom Termination Boards

CHANNELS

256

RELATED MODELS

5700

5700-110

Zakaj izbrati nas:

1. Po najnižji možni ceni lahko dobite popoln material glede na vaše zahteve.

2. Ponujamo tudi cene za predelavo, FOB, CFR, CIF in dostavo od vrat do vrat. Predlagamo vam, da sklenete dogovor o pošiljanju, ki bo precej ekonomičen.

3. Materiali, ki jih nudimo, so popolnoma preverljivi, vse od potrdila o preskusu surovin do končne izjave o dimenzijah. (Poročila bodo prikazana na zahtevo)

4. Zagotavljamo, da bomo odgovorili v 24 urah (običajno v isti uri)

5. Dobite lahko alternativne zaloge, dobave mlinov s čim manjšim proizvodnim časom.

6. Popolnoma smo predani svojim strankam. Če po preučitvi vseh možnosti ne bo mogoče izpolniti vaših zahtev, vas ne bomo zavajali z lažnimi obljubami, kar bo ustvarilo dobre odnose s strankami.

Kaj se zgodi potem?

1. Potrditev po e-pošti

Prejeli boste e-poštno sporočilo, ki potrjuje, da smo prejeli vaše povpraševanje.

2. Ekskluzivni vodja prodaje

Eden od naše ekipe vas bo kontaktiral, da potrdi specifikacijo in stanje vaših delov.

3. Vaš citat

Prejeli boste celovito ponudbo, prilagojeno vašim specifičnim potrebam.

Resnično na voljo več kot 2000 izdelkov

100% popolnoma nov, tovarniško zaprt - original

Pošiljanje po vsem svetu – logistični partnerji UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Garancija 12 mesecev - vsi deli novi ali obnovljeni

Politika vračil brez težav – namenska ekipa za podporo strankam

Plačilo – PayPal, kreditna/debetna kartica ali bančno/bančno nakazilo

HKXYTECH ni pooblaščeni distributer ali zastopnik proizvajalcev, predstavljenih na tej spletni strani. Predstavljena imena blagovnih znamk in blagovnih znamk so last njihovih lastnikov.