Pepperl+Fuchs KFD2-ST2-Ex2 Switch Amplifiers Isolated Barriers

Pepperl+Fuchs KFD2-ST2-Ex2 Switch Amplifiers Isolated Barriers

Description

The KFD2-ST2-Ex2 is a highly versatile 2-channel isolated barrier designed for intrinsic safety applications in industrial environments. It facilitates the secure transfer of digital signals from NAMUR sensors or mechanical contacts in hazardous areas to safe areas. This model is powered by a 24 V DC supply and is equipped with form A normally open relay contacts for the safe area load. The device is constructed with a polycarbonate housing, ensuring durability and resistance to environmental stresses. Its protection degree of IP20 makes it suitable for indoor use in controlled environments. The KFD2-ST2-Ex2 is designed to be mounted on a 35 mm DIN rail, adhering to EN 60715 standards, which simplifies installation and integration into existing infrastructure.

Features

The KFD2-ST2-Ex2 features a removable terminal block with an integrated self-opening device, simplifying installation and wiring processes. The device operates within a temperature range of -20°C to 60°C, making it suitable for diverse environmental conditions. With a rated voltage of 20 to 30 V DC and a power consumption of < 1.3 W, the KFD2-ST2-Ex2 ensures energy efficiency. Its compact design allows for efficient use of space, making it ideal for applications where panel space is limited. The device also supports line fault detection, which can be enabled or disabled via switch S3, enhancing operational safety and reliability. Additionally, it includes a unique collective error messaging feature when used with the Power Rail system, providing immediate notification of errors and enhancing system reliability. The switching point of the device is designed to operate within a range of 1.2 to 2.1 mA, with a switching hysteresis of approximately 0.2 mA, ensuring precise and reliable signal transmission. The device also supports a pulse/pause ratio of ≥ 20 ms/≥ 20 ms, making it suitable for applications requiring precise timing and control.

Function

The primary function of the KFD2-ST2-Ex2 is to transfer digital signals from hazardous areas to safe areas while maintaining galvanic isolation between the two. This ensures that any noise, potential differences, or transients from the hazardous area do not affect the safe area control circuits. The device uses a zener barrier in combination with a galvanic isolation network to limit the energy transmitted to the field, thereby ensuring intrinsic safety. In the event of a fault in the field circuit, the relays revert to their de-energized state, and the LEDs on the device indicate the fault according to NAMUR NE44 standards. This feature ensures quick identification and resolution of issues, minimizing downtime. The KFD2-ST2-Ex2 is certified for use in hazardous locations, adhering to international safety standards and protocols, making it suitable for applications in oil and gas refineries, chemical plants, and other hazardous environments where safety and reliability are paramount.

KCD2-SR-Ex1.LB

KFD2-SR2-Ex1.W

KFA5-SR2-Ex1.W

KFA6-SR2-Ex1.W

KFD2-SR2-Ex1.W.LB

KFA5-SR2-Ex1.W.LB

KFA6-SR2-Ex1.W.LB

KCD2-SR-Ex2

KFD2-SR2-Ex2.W

KFA5-SR2-Ex2.W

KFA6-SR2-Ex2.W

KFA5-SR2-Ex2.W.IR

KFA6-SR2-Ex2.W.IR

KFD2-SR2-Ex2.2S

KFD2-SRA-Ex4

KFD2-SR-Ex1.4S.LK

KFD2-ST2-Ex1.LB

KFD2-ST2-Ex2

KFD2-SOT2-Ex1.LB

KFD2-SOT2-Ex1.LB.IO

KFD2-SOT2-Ex1.N

KFD2-SOT2-Ex2

KFA5-SOT2-Ex2

KFA6-SOT2-Ex2

KFD2-SOT2-Ex2.IO

KFD2-SH-Ex1

KFD2-SH-Ex1.T.OP

KHA6-SH-Ex1

KFD2-DU-Ex1.D

KFA5-DU-Ex1.D

KFA6-DU-Ex1.D

Prečo si vybrať nás:

1. Môžete získať perfektný materiál podľa vašej požiadavky za najnižšiu možnú cenu.

2. Ponúkame tiež ceny prepracovania, FOB, CFR, CIF a doručenia od dverí k dverám. Odporúčame vám uzavrieť dohodu o preprave, ktorá bude celkom ekonomická.

3. Materiály, ktoré poskytujeme, sú úplne overiteľné, od certifikátu o skúške surovín až po konečné vyhlásenie o rozmeroch. (Správy sa zobrazia na požiadanie)

4. Garantujeme, že odpovieme do 24 hodín (zvyčajne v tú istú hodinu)

5. Môžete získať skladové alternatívy, dodávky fréz s minimalizáciou výrobného času.

6. Našim zákazníkom sa plne venujeme. Ak po preskúmaní všetkých možností nebude možné splniť vaše požiadavky, nebudeme vás zavádzať falošnými sľubmi, ktoré vytvoria dobré vzťahy so zákazníkmi.

Čo bude ďalej?

1. Potvrdenie e-mailom

Dostanete e-mail s potvrdením, že sme prijali vašu požiadavku.

2. Exkluzívny manažér predaja

Jeden z nášho tímu vás bude kontaktovať, aby potvrdil špecifikáciu a stav vašej časti (dielov).

3. Váš citát

Dostanete komplexnú cenovú ponuku prispôsobenú vašim špecifickým potrebám.

2000+ produktov skutočne dostupných

100% úplne nový továrensky zapečatený - originál

Celosvetová preprava – logistickí partneri UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Záruka 12 mesiacov - Všetky diely sú nové alebo repasované

Zásady vrátenia bez problémov - Vyhradený tím zákazníckej podpory

Platba – PayPal, kreditná/debetná karta alebo bankový/bankový prevod

HKXYTECH nie je autorizovaným distribútorom ani zástupcom výrobcov uvedených na tejto webovej stránke. Názvy značiek a uvedené ochranné známky sú majetkom ich príslušných vlastníkov.