GMI D1048S SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail Intrinsically Safe Isolators

DESCRIPTION

The single channel DIN-Rail Loop Powered Digital Output Isolator, D1048S, is suitable for driving solenoid valves, visual or audible alarms to alert a plant operator, or other process control devices in Hazardous Area from a driving signal in Safe Area. It can also be used as a controllable supply to power measuring or process control equipment. Its use is allowed in applications requiring up to SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. The Safety PLC or DCS driving signal powers the field device through the D1048S, which provides isolation and is capable of monitoring the conditions of the line. Short and open circuit diagnostic monitoring, dip-switch selectable and active when input power is present, provides LED indication and NC transistor output signaling. When fault is detected output is de-energized until normal condition is restored. Line short and open output circuit fault detection is also reflected on the PLC / DCS input circuit providing less than 10 mA consumption. An override input, dip-switch selectable, is provided to permit a safety system to override the control signal. When enabled, a low input voltage always de-energizes the field device regardless of the input signal. Three basic output circuits are selectable, with different safety parameters, to interface the majority of devices on the market. The selection among the three output characteristics is obtained by connecting the field device to a different terminal block.

FEATURES

SIL3/SC3

Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.

Loop powered for NE loads.

Short and open circuit line diagnostic monitoring with LED, transistor output and current level on input.

Output short circuit proof and current limited

Three port isolation, Input/Output/Fault.

EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.

In-field programmability by DIP Switch.

250 Vrms (Um) max. voltage allowed to the Instruments associated with the barrier.

CHANNELS

1

RELATED MODEL

D1046Y

D5040D

D5040S

D5048S

D5049S

D5240T

X1-IS-DO-01-S

X1-IS-DO-02-S

D1040Q

D1041Q

D1042Q

D1043Q

D1044D

D1044S

D1045Y

D1048S

D1049S

D5244D

D5244S

D1035S

Ihe kpatara ịhọrọ anyị:

1. Ị nwere ike nweta ihe zuru oke dịka ihe ị chọrọ na ọ dịkarịa ala ọnụahịa.

2. Anyị na-enyekwa Reworks, FOB, CFR, CIF, na ọnụ ụzọ nnyefe ọnụ ụzọ. Anyị na-atụ aro ka ịme azụmahịa maka mbupu nke ga-adị oke ọnụ ahịa.

3. Ihe anyị na-enye bụ nkwenye kpamkpam, site na akwụkwọ nyocha nke akụrụngwa ruo na nkwupụta akụkụ ikpeazụ. (Akụkọ ga-egosi na achọrọ)

4. Anyị na-ekwe nkwa inye nzaghachi n'ime 24hours (na-emekarị n'otu awa)

5. Ị nwere ike nweta ngwaahịa ọzọ, igwe ihe nnyefe na ibelata n'ichepụta oge.

6. Anyị raara onwe anyị nye ndị ahịa anyị kpamkpam. Ọ bụrụ na ọ gaghị ekwe omume imezu ihe ndị ị chọrọ mgbe ị nyochachara nhọrọ niile, anyị agaghị eduhie gị site n'ịkwe nkwa ụgha nke ga-eme ka ndị ahịa dị mma.

Gịnị ga-eme ọzọ?

1. nkwenye email

Ị ga-enweta ozi-e na-akwado na anyị enwetala ajụjụ gị.

2. Nanị Sales Manager

Otu n'ime ndị otu anyị ga-akpọtụrụ iji kwado nkọwapụta na ọnọdụ akụkụ (s) gị.

3. Okwu gị

Ị ga-enweta ọnụ ọgụgụ zuru ezu ahaziri maka mkpa gị.

Ngwaahịa 2000+ dị n'ezie

100% Brand New Factory Akara - Nke izizi

Mbupu zuru ụwa ọnụ - ndị mmekọ Logistic UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Akwụkwọ ikike ọnwa 12 - Akụkụ niile dị ọhụrụ ma ọ bụ emezigharịrị

Enweghị amụma nloghachi nsogbu - otu nkwado ndị ahịa raara onwe ya nye

Ịkwụ Ụgwọ - PayPal, Kaadị kredit/Debit, ma ọ bụ Nyefee Bank/Waya

HKXYTECH abụghị onye nkesa ikike ma ọ bụ onye nnọchi anya ndị nrụpụta egosipụtara na webụsaịtị a. Aha ika na ụghalaahịa egosipụtara bụ ihe onwunwe nke ndị nwe ha.