GMI D1048S SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail Intrinsically Safe Isolators

DESCRIPTION

The single channel DIN-Rail Loop Powered Digital Output Isolator, D1048S, is suitable for driving solenoid valves, visual or audible alarms to alert a plant operator, or other process control devices in Hazardous Area from a driving signal in Safe Area. It can also be used as a controllable supply to power measuring or process control equipment. Its use is allowed in applications requiring up to SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. The Safety PLC or DCS driving signal powers the field device through the D1048S, which provides isolation and is capable of monitoring the conditions of the line. Short and open circuit diagnostic monitoring, dip-switch selectable and active when input power is present, provides LED indication and NC transistor output signaling. When fault is detected output is de-energized until normal condition is restored. Line short and open output circuit fault detection is also reflected on the PLC / DCS input circuit providing less than 10 mA consumption. An override input, dip-switch selectable, is provided to permit a safety system to override the control signal. When enabled, a low input voltage always de-energizes the field device regardless of the input signal. Three basic output circuits are selectable, with different safety parameters, to interface the majority of devices on the market. The selection among the three output characteristics is obtained by connecting the field device to a different terminal block.

FEATURES

SIL3/SC3

Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.

Loop powered for NE loads.

Short and open circuit line diagnostic monitoring with LED, transistor output and current level on input.

Output short circuit proof and current limited

Three port isolation, Input/Output/Fault.

EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.

In-field programmability by DIP Switch.

250 Vrms (Um) max. voltage allowed to the Instruments associated with the barrier.

CHANNELS

1

RELATED MODEL

D1046Y

D5040D

D5040S

D5048S

D5049S

D5240T

X1-IS-DO-01-S

X1-IS-DO-02-S

D1040Q

D1041Q

D1042Q

D1043Q

D1044D

D1044S

D1045Y

D1048S

D1049S

D5244D

D5244S

D1035S

Zašto odabrati nas:

1. Možete dobiti savršen materijal prema vašim zahtjevima po najnižoj mogućoj cijeni.

2. Također nudimo cijene za preradu, FOB, CFR, CIF i dostavu od vrata do vrata. Predlažemo da se dogovorite za otpremu koja će biti prilično ekonomična.

3. Materijali koje pružamo potpuno su provjerljivi, od potvrde o ispitivanju sirovina do konačne izjave o dimenzijama. (Izvješća će se prikazati prema zahtjevu)

4. Jamčimo odgovor u roku od 24 sata (obično u istom satu)

5. Možete dobiti alternativne zalihe, isporuke mlinova uz minimalno vrijeme proizvodnje.

6. U potpunosti smo posvećeni našim klijentima. Ako ne bude moguće ispuniti vaše zahtjeve nakon ispitivanja svih opcija, nećemo vas dovesti u zabludu lažnim obećanjima koja će stvoriti dobre odnose s kupcima.

Što je slijedeće?

1. Potvrda e-pošte

Dobit ćete e-poruku s potvrdom da smo primili vaš upit.

2. Ekskluzivni voditelj prodaje

Jedan od našeg tima će vas kontaktirati kako bismo potvrdili specifikaciju i stanje vaših dijelova.

3. Vaš citat

Dobit ćete opsežnu ponudu prilagođenu vašim specifičnim potrebama.

2000+ stvarno dostupnih proizvoda

100% potpuno novo tvornički zapečaćeno - original

Dostava širom svijeta - Logistički partneri UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Jamstvo 12 mjeseci - svi dijelovi novi ili obnovljeni

Politika povrata bez gnjavaže - Predan tim za korisničku podršku

Plaćanje - PayPal, kreditna/debitna kartica ili bankovni prijenos

HKXYTECH nije ovlašteni distributer ili predstavnik proizvođača predstavljenih na ovoj web stranici. Imena robnih marki i zaštitni znakovi su vlasništvo njihovih vlasnika.