GMI D1048S SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail Intrinsically Safe Isolators

DESCRIPTION

The single channel DIN-Rail Loop Powered Digital Output Isolator, D1048S, is suitable for driving solenoid valves, visual or audible alarms to alert a plant operator, or other process control devices in Hazardous Area from a driving signal in Safe Area. It can also be used as a controllable supply to power measuring or process control equipment. Its use is allowed in applications requiring up to SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. The Safety PLC or DCS driving signal powers the field device through the D1048S, which provides isolation and is capable of monitoring the conditions of the line. Short and open circuit diagnostic monitoring, dip-switch selectable and active when input power is present, provides LED indication and NC transistor output signaling. When fault is detected output is de-energized until normal condition is restored. Line short and open output circuit fault detection is also reflected on the PLC / DCS input circuit providing less than 10 mA consumption. An override input, dip-switch selectable, is provided to permit a safety system to override the control signal. When enabled, a low input voltage always de-energizes the field device regardless of the input signal. Three basic output circuits are selectable, with different safety parameters, to interface the majority of devices on the market. The selection among the three output characteristics is obtained by connecting the field device to a different terminal block.

FEATURES

SIL3/SC3

Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.

Loop powered for NE loads.

Short and open circuit line diagnostic monitoring with LED, transistor output and current level on input.

Output short circuit proof and current limited

Three port isolation, Input/Output/Fault.

EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.

In-field programmability by DIP Switch.

250 Vrms (Um) max. voltage allowed to the Instruments associated with the barrier.

CHANNELS

1

RELATED MODEL

D1046Y

D5040D

D5040S

D5048S

D5049S

D5240T

X1-IS-DO-01-S

X1-IS-DO-02-S

D1040Q

D1041Q

D1042Q

D1043Q

D1044D

D1044S

D1045Y

D1048S

D1049S

D5244D

D5244S

D1035S

Hvorfor vælge os:

1. Du kan få det perfekte materiale i henhold til dine krav til den mindst mulige pris.

2. Vi tilbyder også Reworks, FOB, CFR, CIF og dør til dør leveringspriser. Vi foreslår, at du gør en aftale om forsendelse, som vil være ret økonomisk.

3. De materialer, vi leverer, er fuldstændigt verificerbare, lige fra råmaterialetestcertifikat til den endelige dimensionserklæring. (Rapporter vises efter behov)

4. Vi garanterer at give et svar inden for 24 timer (normalt i samme time)

5. Du kan få lageralternativer, mølleleverancer med minimering af fremstillingstid.

6. Vi er fuldt dedikerede til vores kunder. Hvis det ikke er muligt at opfylde dine krav efter at have undersøgt alle muligheder, vil vi ikke vildlede dig ved at give falske løfter, som vil skabe gode kunderelationer.

Hvad sker der nu?

1. E-mail bekræftelse

Du vil modtage en e-mail, der bekræfter, at vi har modtaget din henvendelse.

2. Eksklusiv salgschef

Et af vores team vil kontakte os for at bekræfte din(e) delespecifikation og tilstand.

3. Dit citat

Du vil modtage et omfattende tilbud, der er skræddersyet til dine specifikke behov.

2000+ produkter virkelig tilgængelige

100% splinterny fabriksforseglet - original

Verdensomspændende forsendelse - Logistiske partnere UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express...

Garanti 12 måneder - Alle dele nye eller istandsat

Ingen besvær med returneringspolitik - Dedikeret kundesupportteam

Betaling - PayPal, kredit-/betalingskort eller bank-/bankoverførsel

HKXYTECH er ikke en autoriseret distributør eller repræsentant for producenterne på denne hjemmeside. De nævnte mærkenavne og varemærker tilhører deres respektive ejere.