Pepperl+Fuchs KFD2-SR-Ex1.4S.LK Switch Amplifiers Isolated Barriers

Pepperl+Fuchs KFD2-SR-Ex1.4S.LK Switch Amplifiers Isolated Barriers

Description

The KFD2-SR-Ex1.4S.LK is a highly reliable 1-channel isolated barrier designed for intrinsic safety applications in industrial environments. It enables the secure transfer of digital signals from NAMUR sensors or mechanical contacts in hazardous areas to safe areas. This model is powered by a 24 V DC supply and is equipped with form A normally open relay contacts for the safe area load. The device is constructed with a polycarbonate housing, ensuring durability and resistance to environmental stresses such as dust and moisture. Its protection degree of IP20 makes it suitable for indoor use in controlled environments. The KFD2-SR-Ex1.4S.LK is designed to be mounted on a 35 mm DIN rail, adhering to EN 60715 standards, which simplifies installation and integration into existing infrastructure.

Features

The KFD2-SR-Ex1.4S.LK features a removable terminal block with an integrated self-opening device, simplifying installation and wiring processes. The device operates within a temperature range of -20°C to 60°C, making it suitable for diverse environmental conditions. With a rated voltage of 20 to 30 V DC and a power consumption of < 1.3 W, the KFD2-SR-Ex1.4S.LK ensures energy efficiency. Its compact design allows for efficient use of space, making it ideal for applications where panel space is limited. The device also supports line fault detection, which can be enabled or disabled via switch S3, enhancing operational safety and reliability. Additionally, it includes a unique collective error messaging feature when used with the Power Rail system, providing immediate notification of errors and enhancing system reliability. The switching point of the device is designed to operate within a range of 1.2 to 2.1 mA, with a switching hysteresis of approximately 0.2 mA, ensuring precise and reliable signal transmission. The device also supports a pulse/pause ratio of ≥ 20 ms/≥ 20 ms, making it suitable for applications requiring precise timing and control.

Function

The primary function of the KFD2-SR-Ex1.4S.LK is to transfer digital signals from hazardous areas to safe areas while maintaining galvanic isolation between the two. This ensures that any noise, potential differences, or transients from the hazardous area do not affect the safe area control circuits. The device uses a zener barrier in combination with a galvanic isolation network to limit the energy transmitted to the field, thereby ensuring intrinsic safety. In the event of a fault in the field circuit, the relays revert to their de-energized state, and the LEDs on the device indicate the fault according to NAMUR NE44 standards. This feature ensures quick identification and resolution of issues, minimizing downtime. The KFD2-SR-Ex1.4S.LK is certified for use in hazardous locations, adhering to international safety standards and protocols, making it suitable for applications in oil and gas refineries, chemical plants, and other hazardous environments where safety and reliability are paramount.

KCD2-SR-Ex1.LB

KFD2-SR2-Ex1.W

KFA5-SR2-Ex1.W

KFA6-SR2-Ex1.W

KFD2-SR2-Ex1.W.LB

KFA5-SR2-Ex1.W.LB

KFA6-SR2-Ex1.W.LB

KCD2-SR-Ex2

KFD2-SR2-Ex2.W

KFA5-SR2-Ex2.W

KFA6-SR2-Ex2.W

KFA5-SR2-Ex2.W.IR

KFA6-SR2-Ex2.W.IR

KFD2-SR2-Ex2.2S

KFD2-SRA-Ex4

KFD2-SR-Ex1.4S.LK

KFD2-ST2-Ex1.LB

KFD2-ST2-Ex2

KFD2-SOT2-Ex1.LB

KFD2-SOT2-Ex1.LB.IO

KFD2-SOT2-Ex1.N

KFD2-SOT2-Ex2

KFA5-SOT2-Ex2

KFA6-SOT2-Ex2

KFD2-SOT2-Ex2.IO

KFD2-SH-Ex1

KFD2-SH-Ex1.T.OP

KHA6-SH-Ex1

KFD2-DU-Ex1.D

KFA5-DU-Ex1.D

KFA6-DU-Ex1.D

Zašto odabrati nas:

1. Možete dobiti savršen materijal prema vašim zahtjevima po najnižoj mogućoj cijeni.

2. Također nudimo cijene za preradu, FOB, CFR, CIF i dostavu od vrata do vrata. Predlažemo da se dogovorite za dostavu koja će biti prilično ekonomična.

3. Materijali koje nudimo su u potpunosti provjerljivi, od certifikata o ispitivanju sirovina do konačne izjave o dimenzijama. (Izvještaji će se prikazati na zahtjev)

4. Garantujemo da ćemo dati odgovor u roku od 24 sata (obično u istom satu)

5. Možete dobiti alternativne zalihe, isporuke u mlin uz minimiziranje vremena proizvodnje.

6. U potpunosti smo posvećeni našim kupcima. Ako nakon ispitivanja svih opcija nećemo moći ispuniti vaše zahtjeve, nećemo vas dovesti u zabludu davanjem lažnih obećanja koja će stvoriti dobre odnose s kupcima.

Šta se dalje događa?

1. Potvrda putem e-pošte

Dobit ćete e-poruku koja potvrđuje da smo primili vaš upit.

2. Ekskluzivni menadžer prodaje

Jedan od našeg tima će vas kontaktirati da potvrdi specifikaciju vašeg dijela i stanje.

3. Vaš citat

Dobićete sveobuhvatnu ponudu prilagođenu vašim specifičnim potrebama.

2000+ proizvoda zaista dostupnih

100% potpuno novo tvornički zapečaćeno - original

Dostava širom svijeta - Logistički partneri UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

Garancija 12 mjeseci - Svi dijelovi novi ili remontovani

Politika povrata bez problema - Namjenski tim za korisničku podršku

Plaćanje - PayPal, kreditna/debitna kartica ili bankovni/bankovni transfer

HKXYTECH nije ovlašteni distributer ili zastupnik proizvođača predstavljenih na ovoj web stranici. Istaknuti nazivi robnih marki i zaštitni znakovi vlasništvo su njihovih vlasnika.