GMI D1048S SIL 3 Digital Output Driver, NE Loads, Loop Powered, DIN-Rail Intrinsically Safe Isolators

DESCRIPTION

The single channel DIN-Rail Loop Powered Digital Output Isolator, D1048S, is suitable for driving solenoid valves, visual or audible alarms to alert a plant operator, or other process control devices in Hazardous Area from a driving signal in Safe Area. It can also be used as a controllable supply to power measuring or process control equipment. Its use is allowed in applications requiring up to SIL 3 level (according to IEC 61508:2010 Ed. 2) in safety related systems for high risk industries. The Safety PLC or DCS driving signal powers the field device through the D1048S, which provides isolation and is capable of monitoring the conditions of the line. Short and open circuit diagnostic monitoring, dip-switch selectable and active when input power is present, provides LED indication and NC transistor output signaling. When fault is detected output is de-energized until normal condition is restored. Line short and open output circuit fault detection is also reflected on the PLC / DCS input circuit providing less than 10 mA consumption. An override input, dip-switch selectable, is provided to permit a safety system to override the control signal. When enabled, a low input voltage always de-energizes the field device regardless of the input signal. Three basic output circuits are selectable, with different safety parameters, to interface the majority of devices on the market. The selection among the three output characteristics is obtained by connecting the field device to a different terminal block.

FEATURES

SIL3/SC3

Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.

Loop powered for NE loads.

Short and open circuit line diagnostic monitoring with LED, transistor output and current level on input.

Output short circuit proof and current limited

Three port isolation, Input/Output/Fault.

EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.

In-field programmability by DIP Switch.

250 Vrms (Um) max. voltage allowed to the Instruments associated with the barrier.

CHANNELS

1

RELATED MODEL

D1046Y

D5040D

D5040S

D5048S

D5049S

D5240T

X1-IS-DO-01-S

X1-IS-DO-02-S

D1040Q

D1041Q

D1042Q

D1043Q

D1044D

D1044S

D1045Y

D1048S

D1049S

D5244D

D5244S

D1035S

ለምን መረጡን

1. በሚፈልጉት መሰረት ትክክለኛውን ቁሳቁስ በትንሹ በተቻለ መጠን ማግኘት ይችላሉ.

2. በተጨማሪም Reworks, FOB, CFR, CIF, እና ከቤት ወደ በር የመላኪያ ዋጋዎችን እናቀርባለን. ለማጓጓዝ በጣም ቆጣቢ የሚሆን ስምምነት እንዲያደርጉ እንመክርዎታለን።

3. የምናቀርባቸው ቁሳቁሶች ሙሉ በሙሉ የተረጋገጡ ናቸው, ከጥሬ ዕቃ የሙከራ ሰርተፍኬት እስከ መጨረሻው የመጠን መግለጫ (ሪፖርቶች በሚፈለገው ላይ ይታያሉ)

4. በ 24hours ውስጥ ምላሽ ለመስጠት ዋስትና እንሰጣለን (ብዙውን ጊዜ በተመሳሳይ ሰዓት)

5. የምርት ጊዜን በመቀነስ የአክሲዮን አማራጮችን፣ የወፍጮ አቅርቦቶችን ማግኘት ይችላሉ።

6. ለደንበኞቻችን ሙሉ በሙሉ እንሰጣለን. ሁሉንም አማራጮች ከመረመርን በኋላ የእርስዎን መስፈርቶች ማሟላት የማይቻል ከሆነ, ጥሩ የደንበኛ ግንኙነትን የሚፈጥር የውሸት ቃል በመግባት አናሳስትም.

ቀጥሎ ምን ይሆናል?

1. የኢሜል ማረጋገጫ

ጥያቄዎን መቀበሉን የሚያረጋግጥ ኢሜይል ይደርስዎታል።

2. ልዩ የሽያጭ አስተዳዳሪ

የእርስዎን ክፍል(ቶች) ዝርዝር ሁኔታ እና ሁኔታ ለማረጋገጥ ከቡድናችን አንዱ ይገናኛል።

3. የእርስዎ ጥቅስ

ለእርስዎ ልዩ ፍላጎቶች የተዘጋጀ አጠቃላይ ዋጋ ይደርስዎታል።

2000+ ምርቶች በእውነት ይገኛሉ

100% ብራንድ አዲስ ፋብሪካ የታሸገ - ኦሪጅናል

ዓለም አቀፍ መላኪያ - የሎጂስቲክ አጋሮች UPS / FedEx / DHL / EMS / SF Express / TNT / Deppon Express…

ዋስትና 12 ወሮች - ሁሉም ክፍሎች አዲስ ወይም የታደሱ

የችግር መመለሻ ፖሊሲ የለም - የወሰኑ የደንበኛ ድጋፍ ቡድን

ክፍያ - ፔይፓል፣ ክሬዲት/ዴቢት ካርድ፣ ወይም የባንክ/የሽቦ ማስተላለፍ

HKXYTECH ስልጣን ያለው አከፋፋይ ወይም በዚህ ድረ-ገጽ ላይ የቀረቡት አምራቾች ተወካይ አይደለም። ተለይተው የቀረቡ የምርት ስሞች እና የንግድ ምልክቶች የየባለቤቶቻቸው ንብረት ናቸው።